Shop - Everbrite Protective Coating
Everbrite Inc. manufactures formulations for different surfaces and conditions; protecting metals and other hard surfaces from tarnish, rust, corrosion, fading, chalking, oxidation and UV rays. Sealed surfaces are cleaned up easily with mild soap and water. Metals stay cleaner longer, show less fingerprints and will be much easier to maintain with less effort and time. To decide which coating you need use our Comparison Table or contact us if you need advice. Everbrite is available in different sized cans/kits to suit all projects and has an indefinite shelf life when stored correctly in its can.
Everbrite Protective Coating has extra U.V. blockers and anti-oxidants in it to prevent chalking, fading, oxidation and corrosion.
A tough, clear protective coating that will bring back the colour and lustre of old, faded powder coated or painted metals and protect from the damage that the sun, salt air, acid rain, moisture and other damaging elements can cause. It is best for painted or powder-coated coloured metals, rusted steel architecture, copper roofs and copper exterior fittings, and fibreglass. (Pencil Hardness of H4)
· Painted and powder coated surfaces
Rejuvenates the colour and lustre on faded, dull aluminium or steel siding, metal buildings and roofs, curtain wall, store fronts, window extrusions, garage and storage doors, aluminium joinery and exterior metal that needs U.V. Protection. It is also Graffiti resistant. Find out more about coating faded powder-coatings...
· Copper and rusted metal architecture
Ideal for weather vanes, cupolas and gutters and will protect metal from tarnishing: Use on copper roofs, copper gutters, deck caps and more.
Other Information ...
All delivery fees are charged at cost. There are no handling fees.
Standard Delivery is Track & Trace NZ Parcel Post. Allow 1 to 3 working days.
Options: Add $1.50 for urgent overnight Courier without Signature, $3.70 for Rural Delivery and $4.90 for Saturday delivery.
APPLICATION TOOLS:The project type determines the kind of applicator required.
A round applicator pad is ideal for coating large areas like garage doors and around round fence poles and banisters, guttering etc. An Applicator pad is included in the Large Kit as standard. On special request an applicator pad can be included in the Medium Kit. Applicator pads can be wrapped in aluminium foil for short term protection. Do not use plastic film to wrap. Discard pads after the job is finished.
For narrow profiles you can use a sponge brush although these tend to go soft after 2 or 3 windows. A sponge brush is included in the Starter Kit . Extras are available from craft / hardware stores.
Sponge brushes can be wrapped in aluminium foil for short term protection. Do not use plastic film to wrap. Discard sponge brushes after the job is finished.
If you are coating a lot of window joinery we recommend using the Rota Cota Easy Clean Edger 25mm synthetic paint brush (which is now provided in the medium and large kits )
Please note that this synthetic brush has been tested by Everbrite in New Zealand. It is compatible with the Everbrite Protective Coating (most are not compatible) and provides a superb finish.
Note: You will require Xylene Solvent to clean the brush after each use. Extra Rota Cota paint brushes are available from Bunnings.
Other application tools
Other application tools can be a high density foam roller or pad. If spraying use a high volume low pressure unit with a fine tip.Find out more about the Kit Accessories and other recommended tools
SOLVENTS & CLEAN UP:
Methylated Spirits (100% ethanol) or Xylene Solvent can be used as a solvent wipe prior to coating
Methylated Spirits can also be used to remove wet coating from surfaces. (e.g. glass)
Xylene Solvent can be used to clean up spray tips, paint brushes (meths is not strong enough) and to remove cured/dry coating.
Everbrite Quick User Guides & SpecificationsFor Powdercoated, Painted and Anodised surfaces.pdf
For Rusted Metal.pdf
Everbrite MSDS Material Safety Data Sheet.pdf
We also stock a range of Cleaning and Polishing Products to prepare the finished surface before coating.
Click here to email through your order or ask a question