Everbrite Coatings New Zealand
  info@everbrite.co.nz
    Howick, Auckland, NZ
  0800 102984

Which Coating to use?

Everbrite Inc. manufactures formulations with qualities for different surfaces and conditions; protecting metals and other hard surfaces from tarnish, rust, corrosion, fading, chalking, oxidation and UV rays. To decide which resin coating you need use the Comparison Table below or contact us if you need advice. 



Everbrite Protective Coating  has more U.V. blockers and Anti-oxidants in it.
Everbrite is best for painted or coloured metals, rusted steel, copper roofs and fibreglass boats.  It is a tough, crystal clear protective coating (H4 Pencil Hardness)  that will bring back the colour and lustre of old, faded powder coatings, painted metal and fibreglass and will protect it from the damage that the sun, salt air, acid rain, moisture and other damaging elements can cause.  Everbrite Protective Coating will prevent chalking, fading, oxidation, corrosion, is graffiti resistant. It will also protect metal like copper from tarnishing. 
 Metals stay cleaner longer, show less fingerprints and will be much easier to maintain with less effort and time. Coated surfaces are cleaned up easily with mild soap and water.

Recommended for use on painted and powder coated metal like metal buildings, metal roofs, garage and storage doors, aluminium joinery and exterior metal that needs U.V. Protection like copper roofs, gutters, deck caps and more.



ProtectaClear is a thinner and tougher coating (Pencil hardness of H8) Compare that !
Designed for use on stainless steel, other base metals and substrates that get a lot of use and handling. 
ProtectaClear is a tough, crystal clear protective coating which provides protection for metal from salt damage, tarnish, corrosion and oxidation. It is recommended when abrasion can be a problem and for metal that gets a lot of handling like railings, brass kickplates, jewellery, copper or brass sinks, counter tops, metal around swimming pools or in a marine environment, and where salt can be a problem, Reduces fingerprints and smudges on stainless steel. Keep your Stainless Steel appliances looking great.


Which coating is recommended for.......

Everbrite

ProtectaClear


Painted & Powder coated metals

  • Metal siding
  • Storage Doors
  • Garage Doors
  • Aluminium Joinery
  • Fences
  • Gates
  • Gutters
  • Sheds
  • Playground Equipment
  • Lamp Standards
Everbrite will remain flexible so when doors are rolled up it will not crack or peel off
Protects from colour fade and oxidisation

 YES 

   Everbrite   


Fibreglass

  • Boats
  • Farm Equipment
  • Tractors etc
  • Outdoor Toys

 YES 

   Everbrite   


Unpainted Metals that get a lot of use like:

  • unpainted railings
  • doorknobs
  • kick plates
  • sinks


  YES  

  Protectaclear  

Unpainted Metals in the marine environment:

  • brass
  • copper
  • stainless steel
Both coatings are highly resistant to salts and chlorine

 YES 

   Everbrite   

  YES  

  Protectaclear  

Interior Metal

  • Brass
  • Copper
  • Bronze
  • Zinc

Both coatings can be used indoors

 YES 

   Everbrite   

  YES  

  Protectaclear  

Surfaces that get a lot of heavy use

  • Counters
  • Railings
  • Tables


  YES  

  Protectaclear  

Jewellery

  • Copper
  • Brass
  • Silver
  • Plated metals and more


  YES  

  Protectaclear  

Stainless Steel and other metals around pools (like sculptures)

Protectaclear has excellent resistance to salts and chlorine and supeiror adhesion to bare metals like

stainless steel


  YES  

  Protectaclear  

Copper Gutters, Copper Roofs, Cupolas, Finials, Weathervanes.

Everbrite has additional UV filters to protect exterior metal from tarnishing,


Seal Rusted Metal, Bronze Sculptures and Architectural Metals

 YES 

   Everbrite